Skip to main content

Posts

Showing posts with the label What additional considerations apply to the lathe fixtures?

What additional considerations apply to the lathe fixtures?

                                                          The additional considerations applied to the lathe fixtures are given below: 1. Clamps and other holding devices should be designed in such a way that they will not be loosened by centrifugal force. 2. The workpiece should be gripped on its largest diameter,and whenever possible the gripping diameter should be larger than the diameter being machined. 3. The fixture should be well balanced.Irregular –shaped workpieces may have to be counter weighted to prevent vibration .It is not necessary to achieve perfect balance unless the workpiece is rotating at high speeds. 4. The fixtures should be as lightweight as possible since it is rotating. 5. projections and sharp corners should be avoided as the operator may not be able to see them while the tool is rotating. 6. Thin sections of the workpiece may require support to resist the pressure of the lathe tool