Skip to main content

Posts

Showing posts with the label Drill press

Power transmission of a shaper machine

Size of shaper machine: The size of shaper machine is determined by its maximum stroke in inches. The workpice is clamp to the table usually in a vice. The cutting tool and the table can move vertically. The table moves longitudinally under the cutting tool.  Drill press : Drill press is used for produced hole in inner surface or internally   which is one types of drilling machine.   Common machine shop operations : Drilling is the one of common machine shop operation such as reaming, counter sinking, counter boring and tapping also be one on a drill press. Operating in the machine quite easier. Power transmission of a shaper machine:  Motor → Pulley   →   Pulley → Gear box→ Pinion→ Pinion                                                                                            ↓ Cutting tool → Ram→   Rocker Arm → Sliding Block → Bull Gear                                                                                  

Size of drill press

Its size is following four ways.. i.                    By the diameter of largest disk that can be drilled through the center. ii.                  By the distance spindle moves up and down. iii.               By the maximum distance between the spindle and the table. iv.               By the distance from the column to the center of the spindle.  Common adjustment of a drill press: a.      To raise or lower the table. b.      To tilt the table. c.       To change spindle speed.

What do you mean by Drill Press?

What do you mean by Drill Press? Drill press:   Drill is one kind of machine which is used to produce hole. Drill press is various types such as o.   Bench Type o. Medium type o. Floor type. Drill press purposes : 1.      Drilling 2.      Reaming  3.      Boring 4.      Counter boring 5.      Counter sinking 6.      Tapping.